exosuit ideas and tweeks and others.
Carica
US Join Date: 2016-03-28 Member: 214970Members
US Join Date: 2016-03-28 Member: 214970Members
found this in another post... https://sketchfab.com/models/49a21553d9ba4959ae9fa295170b1671
very cool... but might I suggest making the top part of each leg into a 12 storage compartment (so the grappler arm will reach it) instead of the one on the back of it's body...
also have some the same type of module we can add to like the seamoth for upgrade purposes... ie the perimeter defense system and solar charger... along with new ones... is a module that will make it worth in conjunction with the sonar room... ie control chip that gives depth and distance to selected target.... along with the ability to change what the sonar room is scanning for.
also have a special docking to the sonar room. basically instead of having a spot for a camera port on both sides... you have 1 camera port on one side.... and and a small extension on the other side where you can climb in and out of the exo-suit... this would require a special fragment(s) only found on board the Aurora in a special high tech experimental/equipment room. you can still dock the exo-suit in the cyclops or moonpool as planned for quick access.... but seeing that we are most likely going to be living in the scanner room for most of our needs.
also glass... we all know how to make it out of quartz... but what about when the quartz in a given area runs out? We have tons of sand around.... and in real life, it takes sand and alot of heat. we should be competent enough to know how to make glass this way... much like we have the water filtration machine.... we would need to be using thermal heat... device will be in the base but would be required to be in close proximity to a thermal vent... with a line going into the thermal vent and another going into the sea bed to bring in the sand to make glass. from there we will have to take the glass to another machine in order to make different types of glass.... ie enameled glass... similar to a modification station but stand alone like the seamoth upgrade console.... total of 5 fragments to make this room attachment found near or in a wreck that is near an inactive lava zone entrance.
another idea for the exo suit... a tether line from the cyclops to the the exo-suit... seeing that I read somewhere that the exo-suit doesn't have the capabilities to move through the water like the seamoth, I got to thinking how would the suit get back to the cyclops if it was to far down out of it's reach (that is if it has the capabilities to go deeper than the cyclops)? Then an idea hit... a tether! a 1000m tether line that can be attached to the exo-suit while it's docked in the cyclops.
very cool... but might I suggest making the top part of each leg into a 12 storage compartment (so the grappler arm will reach it) instead of the one on the back of it's body...
also have some the same type of module we can add to like the seamoth for upgrade purposes... ie the perimeter defense system and solar charger... along with new ones... is a module that will make it worth in conjunction with the sonar room... ie control chip that gives depth and distance to selected target.... along with the ability to change what the sonar room is scanning for.
also have a special docking to the sonar room. basically instead of having a spot for a camera port on both sides... you have 1 camera port on one side.... and and a small extension on the other side where you can climb in and out of the exo-suit... this would require a special fragment(s) only found on board the Aurora in a special high tech experimental/equipment room. you can still dock the exo-suit in the cyclops or moonpool as planned for quick access.... but seeing that we are most likely going to be living in the scanner room for most of our needs.
also glass... we all know how to make it out of quartz... but what about when the quartz in a given area runs out? We have tons of sand around.... and in real life, it takes sand and alot of heat. we should be competent enough to know how to make glass this way... much like we have the water filtration machine.... we would need to be using thermal heat... device will be in the base but would be required to be in close proximity to a thermal vent... with a line going into the thermal vent and another going into the sea bed to bring in the sand to make glass. from there we will have to take the glass to another machine in order to make different types of glass.... ie enameled glass... similar to a modification station but stand alone like the seamoth upgrade console.... total of 5 fragments to make this room attachment found near or in a wreck that is near an inactive lava zone entrance.
another idea for the exo suit... a tether line from the cyclops to the the exo-suit... seeing that I read somewhere that the exo-suit doesn't have the capabilities to move through the water like the seamoth, I got to thinking how would the suit get back to the cyclops if it was to far down out of it's reach (that is if it has the capabilities to go deeper than the cyclops)? Then an idea hit... a tether! a 1000m tether line that can be attached to the exo-suit while it's docked in the cyclops.
Comments
Maybe you could make the tether from a dive reel?
yeah that's possible... put a over sized dive reel on the cyclops and attach it to the exo-suit.